Structural characteristics and installation steps of the cantilever racks.

Storage rack for goods, there are more and more types, but if the user wants to store super heavy raw materials, then the cantilever rack will be a good type of rack choice. If the cantilever rack is your ideal type of choice, then the cantilever rack should have a certain understanding of it to be.

Below, Xinmiao storage rack for you to tell you about the cantilever rack comprehensive knowledge information, to a thorough understanding of the cantilever rack can be better used! Cantilever rack in the structure of the column are used H-beam or cold-rolled steel, its cantilever uses square tubes, cold-rolled steel or H-beam; at the same time, the rack height range is about 2.5M (when supporting the use of forklift equipment access can be set up to 6M rack), cantilever length range is about 1.5M, each armload range is about 1000Kg; goods access by forklift, crane or The storage and retrieval of goods is carried out by forklift, crane or manual. Cantilever racks generally have stable structure, good loading capacity, high space utilization rate, and cantilever racks can also be divided into single-sided cantilever racks or double-sided cantilever racks; if the load-bearing capacity can be divided into light, medium and heavy cantilever racks. Cantilever racks are suitable for storing long materials, ring-shaped materials, plates, pipes and irregular goods. These racks are mostly used in the machinery manufacturing industry and building materials supermarkets, etc.

Cantilever rack structure.

1. Cantilever racks can also be divided into single-arm and double-arm racks for efficient storage of wood, pipes, long items and other similar products. Cantilever rack structure can be made up of a single column piece unit with a cantilever and then a number of unit systems formed continuously by horizontal tie rods, diagonal tie rods and other components.

2. where the column piece is composed of column and base, while the column is made of two pieces of special C-shaped steel butt-welded together, this structure is fully designed according to the material resistance to load capacity, it has the characteristics of large load capacity and low cost.

3. The column is also equipped with double rows of holes, the pitch of which is 100mm; the cantilever will be connected to the column through the plate pin, and it can also be adjusted up and down with the pitch of 100mm.

Cantilever rack features.

1. cantilever rack series are used in combination, such a combination of structures can be better disassembled, transport, adjustment, mobile, etc., it's simple and convenient but also safe and reliable.

2. cantilever rack using adjustable column, according to the actual needs to adjust the spacing between the partitions and increase or decrease the number of partition layers.

3. cantilever rack can fully improve space utilization, so that the warehouse materials management standardization, standardization.

4, at the same time cantilever rack is a proven storage system in terms of quality, safety and management.

5, cantilever rack systems can also be used with stacker cranes or forklifts and other equipment, it can not only improve the efficiency of material circulation, reduce storage and transportation costs, increase economic benefits, but also improve the mechanization of material circulation, reduce labor intensity and improve labor conditions.

Cantilever rack installation steps.

1. cantilever rack generally use special profiles to do the base, first two pieces of C-shaped steel back-to-back with connecting steel plate welded together (Hagelis storage rack reminder: the width of the connecting steel plate is the width of the column).

2. when the two pieces of C-beam welding is completed, you need to connect the bolt eye at the location of the connection column, which facilitates the connection with the column.

3. Finally welded connection base plate, which is convenient for expansion bolts and ground connection.

Xinmiao storage rack center provides cantilever rack placement tips.

The correct placement techniques for cantilever racks can better improve the overall economic profitability of the enterprise and the overall performance of the warehouse.

01. side-by-side placement

Side-by-side placement is mainly for some large supermarkets! For large supermarkets, a variety of goods, so when using the cantilever rack is recommended to place it side-by-side, that is, you need to place multiple sets of cantilever racks side-by-side so that the goods in large supermarkets can present a wealth of characteristics, for customers can also play a variety of selective characteristics of the goods, but also to give greater profitability of the goods space.

02. Island layout

This placement technique is mainly associated with the warehouse center with columns. Therefore, in order to better place the cantilever rack, the Hagelis rack center recommends cantilever racks in a certain place in the warehouse, so that they correspond with the pillar so that the placement can also play a real reduction in the effect of the pillar, at the same time, no matter from which arbitrary angle can be displayed to every customer who comes in each of the goods.

03. single row launch

Single line launch technique is mainly placed in the middle of a group of shelves, and then the shelves are placed against the wall, and then U-shaped form of display, such placement techniques are suitable for small warehouses, its management is also more convenient.

04. directional placement

This way of placing cantilevered racks is mainly based on the order to place the cantilevered racks in one direction, which makes the warehouse look more organized and reflects the overall meaning of the area, in order not to look so cluttered, it also enables customers to filter the products they want to buy faster.

For cantilevered racking damaged by external impact, which is still mainly concentrated in three types of warehouses, one is installed with high shelves in large warehouses, such large warehouses are subject to external impact, causing the greatest harm, but also the most prone to impact accidents in the warehouse; second is the forklift road narrow warehouse; third is the uneven ground warehouse.

Hey man, I hope this article can be of some help to you, welcome to follow me, can learn more knowledge.